Services
Grease Interceptor Services
Resolving Grease Interceptor Failures Across Phoenix Metro
Are you dealing with the unmistakable stench of rotting grease baking in the yard, gurgling drains inside your property, or dark sludge pooling around an underground manhole cover? When a heavy-duty interceptor system backs up or structurally fails, chemical drain cleaners and aggressive plunging will not solve the underlying disaster. Gold Star Plumbing & Drain has the heavy equipment and diagnostic expertise to pump, inspect, and resolve the root cause of your interceptor issues so your plumbing can breathe again.
Grease Interceptor Installation & Replacement
Upgrading a failing underground vault requires heavy excavation and precise flow-rate calculations, not just dropping a new box in the dirt. We usually get called for a full replacement when an aging concrete interceptor has structurally failed beyond repair. Hydrogen sulfide gas, a natural byproduct of rotting grease, eats away at concrete walls and steel baffles over time.
You might notice massive sinkholes forming around the vault lid or experience constant backups because the internal baffles have completely collapsed. Sometimes, roots from dry landscaping infiltrate the cracked tank and destroy its structural integrity. Patching a crumbling concrete tank is throwing good money after bad, as the degraded walls will inevitably fail again under the pressure of the surrounding soil.
Signs it is time for a replacement:
- Visible sinkholes or settling dirt around the interceptor lid
- Crumbling concrete or severe corrosion inside the vault walls
- Roots infiltrating through cracked tank seams
- Chronic backups despite recent pumping and cleaning
- A system that cannot handle your current wastewater volume
We dig out the degraded vault, calculate the exact gallons-per-minute flow rate required for your property, and set a highly durable poly-tank or reinforced interceptor. If we find that the old unit was undersized, we correct the sizing before precisely piping the inlet and outlet tees. You can always start with a Grease Interceptor Inspection & Testing visit to confirm if the tank is truly dead or just needs a mechanical repair. Explore our complete Grease Interceptor Installation & Replacement coverage to see how we approach planned upgrades.
Grease Interceptor Repair & Service
Catching a broken internal component early is a targeted repair that saves you from a massive plumbing disaster downstream. Not every problem requires a full tank replacement, as the vault itself is often structurally sound while the internal components have failed. The internal baffles separating the grease from the water can crack, warp, or fall over entirely.
When a baffle fails, grease passes straight through the interceptor and directly into your outbound sewer lines. This leads to severe downstream clogs and potential municipal fines for contaminating the main sewer system. We have to pump the tank down completely to see what is actually broken, as diagnosing these issues through a layer of dark sludge is impossible.
Targeted Internal Repairs
Once the tank is empty, we inspect the inlet and outlet sanitary tees, check the integrity of the baffle walls, and examine the manhole rings and gaskets. We repair or replace broken PVC tees, rebuild collapsed baffles, and seal any minor leaks around the access points. We also ensure that the venting system is clear so dangerous gases can escape safely without building pressure inside the vault.
Common internal failures we repair:
- Broken or detached inlet and outlet sanitary tees
- Collapsed, warped, or corroded baffle walls
- Degraded manhole rings allowing groundwater infiltration
- Blocked or damaged venting pipes
- Faulty gaskets causing foul odors to escape
Catching a broken baffle early costs a fraction of the price of replacing a ruined sewer line. Ignoring it means grease will coat your entire outbound pipe network, turning into a concrete-like blockage when mixed with our hard water scaling. If your system is just heavily backed up with solid waste, a thorough Grease Interceptor Cleaning might be all you need to get things flowing before we inspect the components. Whether you need a broken baffle rebuilt or a cracked tee replaced, our Grease Interceptor Repair & Service team handles every call across Phoenix Metro.
Grease Interceptor Inspection & Testing
A professional inspection gives you a clear baseline of your system's health before a catastrophic backup ruins your property. Property owners usually call us for compliance testing when buying a new property with an existing high-capacity interceptor, or when they notice mysterious foul odors but have not seen a full backup yet. You need to know the exact condition of this massive underground asset before taking ownership or ignoring a strange smell.
We do not just shine a flashlight down the hole and guess at the structural integrity. We perform a precise dipstick test to measure the exact layer of fats, oils, and grease versus the water level and bottom solids. We check the structural integrity of the vault walls, test the flow rate to ensure water is moving at the correct velocity, and verify that the system is properly venting.
What we check during a thorough inspection:
- Dipstick testing to measure exact FOG (Fats, Oils, and Grease) levels
- Structural integrity of the vault walls, floor, and lid
- Flow rate velocity to ensure proper wastewater separation
- Venting systems to confirm dangerous gases are escaping safely
- Condition of all internal baffles and sanitary tees
Paying for an annual inspection is the difference between scheduling routine maintenance on your own terms versus waking up to an emergency plumbing bill. If the inspection reveals that the tank is structurally compromised, we will walk you through your options for Grease Interceptor Installation & Replacement before the tank collapses. Knowing the exact condition of your interceptor keeps you ahead of massive failures. Compare your equipment against our Grease Interceptor Inspection & Testing checklist before you experience a costly backup.
Grease Interceptor Cleaning
True interceptor cleaning is a heavy-duty extraction process, not a lazy surface skim. Interceptors fail when they exceed the 25 percent rule, meaning grease and solids take up more than a quarter of the tank's total liquid depth. Symptoms of an overloaded tank include slow drains across the entire property, gurgling toilets, and a stench that hangs heavily over the yard.
In our dry, hot climate, that thickened grease solidifies rapidly if left unmaintained. Skimping on regular pumping schedules means the grease hardens into a dense block that standard vacuum trucks cannot easily remove. Once it solidifies, you are looking at intensive mechanical scraping and hydro jetting to clear the lines and restore the tank's capacity.
The Deep Cleaning Process
We do not just vacuum the top layer of grease and call it a day. We pump the tank completely dry, scrape down the hardened fats and oils from the interior walls, and remove the heavy food solids from the bottom. Once the tank is empty, we inspect the structural integrity of the clean vault to ensure no hidden damage exists behind the sludge.
Steps in our deep cleaning process:
- Complete pump-down of all liquids, grease, and bottom solids
- Mechanical scraping of hardened FOG from the interior walls
- Hydro jetting of the inlet and outlet lines to clear residual buildup
- Visual inspection of the empty tank for hidden structural damage
- Proper disposal of all waste in compliance with local regulations
If a deep clean reveals worn internal components or a cracked baffle, a Grease Interceptor Repair & Service visit is the immediate next step. Keeping the tank clean is the only way to accurately diagnose the mechanical health of the system. Reset your system's performance with a thorough Grease Interceptor Cleaning to prevent hardened blockages.
The Gold Star Standard for Interceptor Service
Dealing with a grease interceptor is an inherently dirty, foul-smelling job, but we treat your property with absolute respect. We show up on time, secure the area around the interceptor, and immediately get to work pumping down the system so we can actually see what we are diagnosing. We never guess from the surface, and we bring the right heavy equipment to handle the job safely.
We take photos of the inside of your tank and explain exactly what has failed, whether it is a collapsed baffle, a broken tee, or just a tank that is overdue for a heavy scrape. We provide transparent pricing before any wrenches are turned or digging begins. When Gold Star Plumbing & Drain leaves, the tank is sealed, the yard is cleaned up, and your plumbing is flowing perfectly again.
Complete Line Protection & Drain Services
When a grease interceptor fails, the collateral damage usually impacts the main sewer and drain lines leading away from the vault. If grease has bypassed a broken baffle, it coats your outbound pipes and requires heavy-duty intervention to clear. We do not just fix the tank; we ensure the entire outbound plumbing system is free of hardened fats and oils.
We offer comprehensive Hydro Jetting to scour hardened grease out of your main lines using high-pressure water. If the backup has compromised your broader plumbing network, our teams handle complete Sewer Line repairs and heavy-duty Drain clearing to restore full flow to your property.
Stop the Backup Before It Ruins Your Property
An overflowing or broken grease interceptor is a ticking time bomb that threatens your property with raw sewage, horrific odors, and massive structural damage. Do not wait for a minor drain gurgle to turn into an environmental disaster in your yard.
Stop living with slow wastewater and foul smells. Reach out to our team today to get an expert out to your property and resolve your interceptor issues for good.
Tell us what it is doing.
Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. If water is moving right now, call instead. A person answers.
- East Valley (480) 571-5944
- Prescott (928) 813-0825
- Flagstaff (928) 691-4432
- Hours
- Open 24 hours, seven days
- Licence
- Arizona ROC 327327
Book a time online
The online scheduler is not available right now.
Or tell us what is going on
Request Your Service
Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. Need help now? Call: emergency plumbers are dispatched 24/7.
Loading form. If it does not load, please use the other contact options on this page.
How we use your information: Privacy Policy · Your Privacy Choices