Skip to content
East Valley (480) 571-5944 · Northern AZ (928) 813-0825 · Open 24 hours, seven days. $300 off tankless water heater installation → · Finance now →

Tankless Water Heater

Tankless Water Heater Installation & Replacement in Goodyear, AZ

Solving Tankless Water Heater Failures in Your Goodyear Home

Are you experiencing sudden drops in hot water pressure, getting blasted with cold water in the middle of a shower, or constantly resetting error codes on your unit's display panel? When a tankless unit starts fluctuating in temperature or restricting flow, it usually means scale buildup is actively choking the heat exchanger and forcing the system to overwork. You don't have to live with unreliable hot water because Gold Star Plumbing & Drain provides expert tankless water heater installation and replacement services to get your home's system flowing flawlessly again.

Warning Signs Your Tankless Water Heater is Failing

Fluctuating Water Temperatures

Stepping into a hot shower only to get a sudden blast of cold water before it turns hot again is a massive red flag. This frustrating experience, often called a cold sandwich, happens because the unit's internal flow sensor is failing to register the demand for hot water consistently. When the sensor drops the signal, the burner shuts off momentarily, sending unheated water straight to your showerhead.

This issue usually means mineral deposits are interfering with the sensor's physical ability to trigger the burner assembly. As the buildup gets worse, the periods of cold water will become longer and more frequent. If left alone, the unit will eventually stop heating water altogether, leaving you completely without hot water.

Noticeable Drop in Hot Water Pressure

You might turn on the hot water tap and notice it comes out at a mere trickle, while your cold water pressure remains perfectly strong. Inside the tankless unit, water passes through a series of very narrow copper or stainless steel tubes to heat up quickly. When heavy scale from Goodyear's notoriously hard water builds up inside these tubes, it physically chokes off the pathway, restricting the volume of water that can pass through.

Ignoring this restriction causes extreme pressure to build up on the internal piping and connections. The system is forced to push water through a heavily calcified maze, which stresses every component along the way. This localized high pressure is a leading cause of internal leaks and premature unit failure.

Frequent Error Codes on the Control Panel

Most modern tankless units feature a digital display that flashes a specific diagnostic code when something goes wrong with the system. You might notice the unit shutting down and beeping with codes related to ignition failure, exhaust blockages, or severe scale buildup. These codes are the system's built-in safety mechanism, designed to protect the unit from a catastrophic internal meltdown.

Continuously unplugging or resetting the unit to clear the code without addressing the root cause is a dangerous game. Forcing the system to run while it is actively detecting a fault will permanently damage the motherboard or warp the heat exchanger. When error codes become a regular occurrence, it is time for a professional assessment.

Strange Rumbling or Whining Noises

When the hot water is running, you might hear a high-pitched whine, a low rumble, or a popping sound coming directly from the unit. This is the sound of water struggling to pass through heavily calcified heating elements, a phenomenon often referred to as kettling. It can also indicate that the burner is struggling to vent properly, causing small, localized pressure fluctuations during combustion.

These noises indicate that the system is working exponentially harder than it was designed to operate. The extra strain drives up your monthly energy bills because the burner has to run longer to push heat through the mineral barrier. Ultimately, this excessive workload wears out critical components rapidly and shortens the lifespan of the heater.

Common Causes Behind Tankless Water Heater Issues

Severe Mineral and Scale Accumulation

By far the most common cause of tankless water heater failure is hard water scale buildup. Because the water is flash-heated to extremely high temperatures on demand, the calcium and magnesium in the water separate and bake onto the heat exchanger incredibly fast. In areas with high mineral content like Goodyear, units that aren't flushed annually will quickly choke themselves out.

The intense heat causes these minerals to form a rock-hard layer of insulation inside the heat exchanger tubing. The burner then has to fire hotter and longer to penetrate this mineral barrier, which scorches the internal components. The solution involves either a heavy chemical descaling if caught early, or replacing the unit entirely and adding a water treatment system.

Undersized Gas Lines

Homeowners upgrading from a traditional tank to a tankless system often experience immediate performance issues or system lockouts. This happens because a standard tank might use 40,000 BTUs of gas, while a tankless unit demands up to 199,000 BTUs to flash-heat water on demand. Many standard residential gas lines simply cannot deliver that massive volume of fuel fast enough to sustain combustion.

When the unit is starved for gas, it will continuously misfire, drop the water temperature, or shut down completely to prevent hazardous combustion issues. This is especially common in newer master-planned communities where builder-grade gas lines were sized only for basic appliances. The solution involves calculating the total gas load for the property and upsizing the gas pipe running to the unit.

Aging or Corroded Heat Exchangers

Over years of daily use, the constant expansion and contraction from extreme heat takes a toll on the internal metals. This thermal stress, combined with heavy mineral buildup and slightly acidic water conditions, can cause pinhole leaks to develop in the heat exchanger. Once the copper or stainless steel cracks, water begins leaking directly into the combustion chamber.

Water dripping onto the electrical components and burner assembly causes immediate electrical shorts and severe corrosion. Because the heat exchanger is the absolute most expensive part of the unit to manufacture, this kind of structural damage is rarely cost-effective to repair. When a heat exchanger fails, it almost always warrants a complete system replacement.

Improper Initial Venting or Installation

You might experience frequent exhaust error codes or find your unit shutting down on windy days if the original installation was done poorly. Tankless units require highly specific venting materials, such as concentric PVC or specialized stainless steel, to operate safely. They also require exact clearances to pull in enough fresh combustion air and expel dangerous exhaust gases outdoors.

If the previous installer used the wrong pipe size, ran the vent line too far, or failed to account for exterior wind factors, the unit will literally suffocate. A suffocating unit will shut down to prevent carbon monoxide from backing up into the living space. Proper replacement involves re-routing or replacing the exhaust venting entirely to meet strict manufacturer specifications.

Exterior Environmental Wear

Many homes have their tankless units mounted on the exterior walls to save interior space. While these units are designed to withstand the elements, extreme summer temperatures can cause premature wear on the plastic housing components and internal insulation. The intense heat beating down on the unit bakes the protective casings and can degrade the weather seals over time.

When these seals fail, dust, debris, and moisture can infiltrate the sensitive computer boards and gas valves. This environmental exposure leads to erratic behavior, random sensor failures, and accelerated corrosion of the external fittings. When replacing an exterior unit, it is crucial to situate it properly and ensure all weatherproofing measures are fully intact.

What to Expect During Your Tankless Water Heater Installation

Comprehensive System Assessment

When a professional arrives to replace or install your new system, the process is thorough and focused entirely on long-term reliability. First, we evaluate your home’s exact hot water demands, inspect your current gas line capacity, and test the local water quality. If you are converting from a standard tank, we will safely drain and remove the old, bulky unit from your garage to help you reclaim that valuable square footage.

Precision Installation and Testing

Next, the new tankless unit is securely mounted, and we ensure the gas supply is perfectly sized for the massive BTU requirements. We upgrade the venting to meet modern safety codes and install isolation valves, which are absolutely critical for future maintenance and annual flushing. Finally, the system is fired up, the temperature is carefully calibrated, and the hot water flow is tested at multiple fixtures simultaneously to ensure perfect performance.

Clean and Respectful Service

Gold Star Plumbing & Drain proudly serves Goodyear and the surrounding areas, ensuring every installation meets strict manufacturer guidelines and local building codes. We respect your property by using drop cloths and protective gear, ensuring the work area is spotless when we finish. You will be left with a fully optimized system that delivers endless hot water exactly when you need it.

Related Plumbing Upgrades to Protect Your System

Because local water conditions directly impact the lifespan of your new heater, pairing your installation with a water softener installation and replacement is the best way to prevent scale from destroying the heat exchanger. Additionally, if you are upgrading from a traditional tank for the first time, you may require a gas line installation and replacement to ensure your home can safely deliver the high volume of fuel required. Addressing these related systems during your installation guarantees your new tankless unit operates at peak efficiency for years to come.

The Cost of Delaying Tankless Water Heater Replacement

Waiting to replace a failing tankless water heater rarely saves money in the long run. As scale buildup worsens and components degrade, the unit loses its energy efficiency, causing your monthly utility bills to creep upward. The burner is forced to run significantly longer to heat the same amount of water, wasting expensive gas and stressing the system.

More importantly, an overworked system is highly prone to internal leaks that can cause significant property damage. If the heat exchanger cracks, water can flood the unit's expensive computer board, turning a manageable service need into a sudden emergency with no hot water at all. Replacing a struggling unit before it completely fails ensures you maintain control over the process and avoid major disruptions to your daily life.

Get Reliable Hot Water in Your Goodyear Home Today

You rely on hot water for nearly everything, and a failing tankless system shouldn't be allowed to disrupt your daily routine. Whether you need to replace a burnt-out unit or want to upgrade your home to an endless, on-demand hot water supply, professional installation is just a call away. Reach out to Gold Star Plumbing & Drain today to schedule an assessment and get your hot water system running flawlessly again.

Tell us what it is doing.

Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. If water is moving right now, call instead. A person answers.

Hours
Open 24 hours, seven days
Licence
Arizona ROC 327327

Book a time online

Pick a slot and it is a confirmed appointment, not a request.

Rather talk it through? Call (480) 571-5944 — a person answers, every hour of every day.

Or tell us what is going on

Send it through and a member of the Gold Star team will call you back to answer your questions and schedule the work.

Request Your Service

Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. Need help now? Call: emergency plumbers are dispatched 24/7.

Loading form. If it does not load, please use the other contact options on this page.

How we use your information: Privacy Policy · Your Privacy Choices

Call now Book online