Tankless Water Heater
Tankless Water Heater Maintenance & Tune-Up in Chandler, AZ
When Your Chandler Tankless Water Heater Needs a Tune-Up
Are you suddenly experiencing drops in hot water pressure, getting blasted with cold water in the middle of a hot shower, or noticing a flashing error code on your water heater's control panel? In our area, these symptoms rarely fix themselves and usually mean hard water scale has choked the heat exchanger or desert dust has clogged the air intake. Gold Star Plumbing & Drain is ready to step in with a professional flush and tune-up to clear the buildup, reset the system, and restore reliable, endless hot water to your home.
Warning Signs That Your Tankless Water Heater Needs Maintenance
Inconsistent Water Temperatures
You turn on the shower, it gets hot, suddenly goes freezing cold for a few seconds, and then gets hot again. This frustrating experience is commonly known as a "cold water sandwich" in the plumbing industry. It happens when the unit's flow sensor or heat exchanger struggles to register the demand for hot water consistently.
Mineral deposits frequently interfere with these sensitive sensors or restrict the water flow needed to keep the burners ignited. If ignored, the temperature fluctuations will become much more frequent over time. Eventually, this leads to a complete failure to ignite when hot water is requested.
Noticeable Drop in Hot Water Pressure
If the cold water pressure in your house is perfectly fine but the hot water slows to a trickle, your system is struggling. Tankless units have very narrow internal pipes and inline screen filters designed to catch debris before it enters the system. When scale builds up in these narrow passages or debris clogs the screen, it physically blocks the water from moving through the unit at full capacity.
Forcing water through a restricted heat exchanger puts immense strain on your entire plumbing system and the water heater itself. It can cause internal leaks to develop as pressure builds up behind the blockage. In severe cases, the restricted flow can permanently warp the delicate heating elements.
Strange Rumbling or Whining Noises
Hearing a low rumbling, vibrating, or high-pitched whining sound from your unit while it runs is a clear cry for help. Rumbling, often referred to as "kettling," happens when water gets trapped behind scale buildup and boils into steam. This creates a vibrating sensation that you can often hear through the walls of your home.
Whining noises usually indicate that the fan or air intake is severely restricted by dust or debris. This forces the blower motor to work overtime to pull in enough oxygen for proper combustion. Continuing to run a unit that is kettling or whining can easily crack the heat exchanger.
Flashing Error Codes on the Display
When your unit stops working entirely, the digital display or remote controller inside the house will often flash a specific two- or three-digit code. Modern tankless water heaters are highly computerized and use these codes as safety lockouts. They indicate that the unit has detected a blocked exhaust, an ignition failure, or severe scale buildup that risks overheating the system.
Resetting the unit by unplugging it might clear the code temporarily, but it bypasses a critical safety feature. The underlying issue must be resolved by a professional before the unit permanently locks out. Ignoring these codes can also create a serious fire hazard or gas safety issue.
Common Causes Behind Tankless Water Heater Issues
Severe Mineral Buildup and Scale
As water is rapidly heated, the calcium and magnesium dissolved in it separate and bake onto the metallic walls of the heat exchanger. Over time, this creates a thick, chalky crust that severely restricts water flow and heat transfer. Because Chandler has notoriously hard water, this process happens much faster here than in other parts of the country.
A unit that might go two years between flushes elsewhere often needs it annually, or even more frequently, in our area. The solution involves isolating the unit from the home's plumbing to protect your interior pipes. We then circulate a specialized descaling solution through the heat exchanger for about an hour to dissolve the crust completely.
Clogged Air Intakes and Exhausts
Many homes in our area feature exterior-mounted tankless units to save valuable interior space. While convenient, this constant outdoor exposure leaves them vulnerable to frequent dust storms, yard maintenance debris, and general airborne dirt. When the intake screens become caked in this grime, the unit cannot pull in enough air to burn the gas cleanly.
Without proper airflow, the system essentially suffocates and shuts down to prevent carbon monoxide buildup. A proper tune-up includes removing the front panel and inspecting the entire combustion chamber. We thoroughly clean the air intake filter, fan, and venting pipes to ensure safe, highly efficient operation.
Dirty In-Line Water Filters
The small mesh screen located where the cold water enters your unit is your first line of defense against debris. This filter can easily become clogged with sediment, pipe scale, or municipal water debris over months of use. This issue is especially common after municipal water line work in the neighborhood stirs up sediment in the main lines.
Homes with older plumbing that occasionally shed rust or scale are also highly susceptible to clogged intake filters. During maintenance, the technician will shut off the water supply and carefully remove this filter housing. We clean the mesh thoroughly and inspect the vital O-rings before reinstalling it to restore your full water pressure.
Fouled Flame Sensor or Igniter
Sometimes the unit tries to fire up, but the flame sensor cannot detect the flame due to a buildup of carbon or oxidation. When this happens, the control board shuts the gas valve off immediately as a built-in safety precaution. This is a normal wear-and-tear issue, but it is heavily exacerbated by poor air quality or improper combustion caused by dirty air intakes.
Our technicians carefully remove the flame rod and igniter to inspect them for damage or heavy carbon tracking. We clean the probes with an abrasive pad to remove oxidation and restore the bare metal surface. Finally, we test the micro-amps with a multimeter to ensure they are reading correctly and communicating with the control board.
What to Expect During Your Maintenance Visit
System Assessment and Error Code Review
We start every maintenance visit by checking the digital display for any stored error codes in your system's diagnostic history. Our technician will also test the current water temperature and flow rate at various faucets to establish a performance baseline. This diagnostic step ensures we understand exactly how your system is currently operating before we begin taking things apart.
Isolation and Descaling Flush
Using the unit's built-in isolation valves, we will securely disconnect the heater from your home's main water supply. We then attach a commercial submersible pump and circulate a specialized descaling solution through the heat exchanger for forty-five to sixty minutes. This targeted, high-velocity flush safely breaks down and flushes away the hard water minerals that are choking your system.
Component Cleaning and Gas Pressure Check
While the descaling flush is running, we turn our attention to the unit's vital air and fuel components. We clean the air intake filter, clear the in-line cold water screen, and inspect the exhaust venting for any physical obstructions. We also remove the front cover to inspect the burner chamber, clean the flame sensor, and verify the incoming gas pressure.
Final Testing and Verification
Once everything is reassembled and reconnected to your plumbing, we fire up the unit for a final performance test. We verify that the hot water is quickly reaching the correct temperature and that your flow rates are fully restored. Gold Star Plumbing & Drain proudly provides this comprehensive maintenance process to keep your system running flawlessly year-round.
Comprehensive Plumbing Solutions for Your Home
Water Quality and Repair Services
The most effective way to protect a tankless water heater from scale buildup is to remove the hard minerals before they enter the unit. We highly recommend a professional water softener installation & replacement to drastically extend the lifespan of your equipment and reduce the frequency of required descaling flushes. If during the tune-up we discover a failed component, we can easily transition into tankless water heater repair & service to replace the broken parts and get your system back online quickly.
The True Cost of Skipping Tankless Maintenance
Voided Manufacturer Warranties
Almost all major tankless water heater manufacturers strictly require proof of regular, professional maintenance to keep your warranty valid. If a heat exchanger fails due to scale buildup and you cannot prove it was regularly descaled, the manufacturer will likely deny the warranty claim. Staying on top of your annual maintenance schedule protects your valuable warranty coverage and your wallet.
Premature System Failure
A well-maintained tankless water heater should easily provide reliable service for fifteen to twenty years. However, forcing a unit to operate with a scaled-up heat exchanger causes it to run significantly hotter and work much harder. This intense thermal stress can cause the delicate heat exchanger to crack and leak water inside the cabinet.
Replacing a cracked heat exchanger is often so labor-intensive and expensive that it makes more sense to replace the entire unit. Routine maintenance completely prevents this unnecessary thermal stress. It ensures the internal components can transfer heat efficiently without destroying themselves in the process.
Spiking Energy Bills
Mineral scale acts as a highly effective insulator between the gas burners and your incoming water supply. When the heat exchanger is heavily coated in this buildup, the burner has to use significantly more gas to heat the water to your desired temperature. This inefficiency quietly drives up your monthly utility costs while providing worse hot water performance.
Schedule Your Chandler Tankless Water Heater Tune-Up Today
Don't wait for your hot water to disappear completely or for an expensive internal component to fail under pressure. Regular maintenance is the absolute best way to keep your tankless system efficient, safe, and reliable for years to come. The experienced team at Gold Star Plumbing & Drain is ready to perform a thorough flush and inspection to protect your investment, so reach out today to schedule your Chandler tankless water heater maintenance and enjoy uninterrupted, endless hot water once again.
Tell us what it is doing.
Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. If water is moving right now, call instead. A person answers.
- East Valley (480) 571-5944
- Prescott (928) 813-0825
- Flagstaff (928) 691-4432
- Hours
- Open 24 hours, seven days
- Licence
- Arizona ROC 327327
Book a time online
The online scheduler is not available right now.
Or tell us what is going on
Request Your Service
Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. Need help now? Call: emergency plumbers are dispatched 24/7.
Loading form. If it does not load, please use the other contact options on this page.
How we use your information: Privacy Policy · Your Privacy Choices