Skip to content
East Valley (480) 571-5944 · Northern AZ (928) 813-0825 · Open 24 hours, seven days. $300 off tankless water heater installation → · Finance now →

Tankless Water Heater

Tankless Water Heater Maintenance & Tune-Up in Deer Valley, AZ

Resolving Flow and Temperature Issues with Tankless Water Heater Maintenance in Deer Valley, AZ

Are you getting frustrating error codes on your tankless unit's display, noticing a sudden drop in hot water pressure, or experiencing the dreaded "cold water sandwich" right in the middle of your shower? Tankless systems are highly efficient, but when Deer Valley's notoriously hard water bakes mineral deposits onto the heat exchanger, the unit has to work twice as hard and can eventually burn out completely. You do not have to put up with unreliable hot water, because the experts at Gold Star Plumbing & Drain are ready to thoroughly flush, descale, and calibrate your system today.

Signs Your Tankless Water Heater Needs a Tune-Up

The Unit is Displaying Error Codes

Customers often notice a blinking code on their remote temperature controller or the unit's front panel. These codes might appear intermittently at first, often clearing when the unit is reset, only to return a few days later. Modern tankless heaters are equipped with highly sensitive components that monitor water flow, exhaust temperatures, and combustion quality.

An error code is the system's way of telling you that one of these parameters is operating outside of a safe range. This is most commonly due to mineral scale buildup restricting water flow through the internal pathways. If you continuously reset the unit without addressing the root cause, the system will eventually lock out completely to prevent a dangerous overheating situation.

Fluctuating Water Temperatures

You step into a hot shower, and two minutes later, you are hit with a blast of cold water, followed by hot water again. This happens when the unit's flow sensor becomes gummed up with mineral deposits or incoming debris. The sensor fails to register that water is still moving through the system, causing the burners to shut off momentarily before re-igniting.

Beyond being incredibly uncomfortable, this erratic burner cycling puts unnecessary wear and tear on the gas valve, igniter, and heat exchanger. Over time, this rapid cycling severely shortens the lifespan of the equipment and leads to unexpected breakdowns. A proper maintenance visit clears these sensors so they can accurately read the water flow and keep the burners firing steadily.

Reduced Hot Water Pressure

The cold water flows strongly from your faucets, but the moment you switch to hot water, the pressure drops to a weak trickle. Tankless units have a small inline mesh filter on the cold water inlet designed to catch sediment before it enters the system. Over time, municipal sediment and mineral flakes clog this screen and severely restrict the flow.

Additionally, severe scaling inside the unit physically narrows the water's pathway through the heat exchanger. Ignoring this forces the unit to operate under immense pressure strain as it tries to push water through blocked pipes. It will eventually trigger a low-flow safety shutoff, leaving you with absolutely no hot water at all.

Unusual Whining or Rumbling Noises

When a hot water tap is opened, the unit in the garage or on the side of the house makes a loud whining, groaning, or low rumbling sound. As scale builds up inside the copper or stainless steel heat exchanger, it acts as a thick insulator against the heat. The burners have to run much hotter to heat the water through that stubborn layer of scale.

The noise you hear is often water flash-boiling against these excessively hot, scaled-up surfaces. This is a critical warning sign of impending failure that requires immediate professional attention. Flash-boiling causes micro-fractures in the heat exchanger, inevitably leading to internal leaks and a completely destroyed unit.

What Causes Tankless Water Heater Performance to Drop?

Severe Hard Water Scaling

Calcium and magnesium dissolved in the water supply drop out of suspension when the water is heated rapidly. These minerals then bake onto the internal walls of the unit's heat exchanger, creating a rock-hard layer of scale. Deer Valley's exceptionally hard municipal water makes this the number one enemy of tankless systems in the area.

Without a water softener, a tankless unit here can lose significant efficiency in just a single year of normal operation. The solution involves isolating the unit from the home's plumbing and circulating a specialized descaling solution through the heat exchanger. This process takes about an hour and safely dissolves the rock-hard minerals blocking the water flow.

Clogged Inlet Water Filters

Small particles of sand, dirt, and pipe scale from the city's water mains travel into your home's plumbing and get trapped in the tankless unit's inlet screen. Because of ongoing development and municipal pipe maintenance in the area, sediment easily gets stirred up and pushed into residential water lines. This sediment quickly overwhelms the small mesh filter protecting your heater.

When this filter clogs, the unit simply cannot pull in enough water to activate the internal flow sensor. A technician will shut off the water supply, remove the inline filter assembly, and clean it thoroughly to remove all debris. We also carefully inspect the O-rings before reinstalling the assembly to restore full water flow without creating any leaks.

Dirty Flame Sensors and Igniters

Sometimes the system attempts to fire up, but the flame sensor fails to detect the flame. This causes the unit to immediately shut the gas valve as a safety precaution, leaving you with cold water. Because many units in this area are installed in garages or outside, the dry, dusty local environment pulls airborne particulates right into the combustion chamber.

This desert dust coats the flame rod, insulating it so it cannot accurately read the flame. A professional tune-up includes opening the combustion chamber and gently cleaning the flame rod and igniter with a specialized abrasive pad. We also clear out any accumulated dust from the burner assembly to ensure clean, efficient combustion.

What to Expect During Your Tankless Maintenance Visit

Thorough Descaling and Flushing

When you schedule maintenance with Gold Star Plumbing & Drain, a technician will arrive ready to perform a comprehensive diagnostic and cleaning of your system. First, we utilize the isolation valves to disconnect the unit from your home's water supply without shutting off the water to the rest of your house. We then connect a submersible pump and circulate a professional-grade descaling solution through the heat exchanger for nearly an hour.

This continuous circulation safely eats away the mineral buildup and restores the internal pathways to their original diameter. We monitor the solution as it flows to ensure all scale is completely dissolved and flushed out. Once the heat exchanger is clear, we flush the entire system with fresh water to remove any lingering descaler.

Component Inspection and Calibration

While the unit is flushing, we do not just stand around waiting for the timer to go off. We clean the inlet water filter, inspect the air intake and exhaust venting for dust or debris blockages, and clean the flame sensor and ignition rods. We also examine the internal wiring and check for any signs of moisture that could indicate a tiny internal leak.

Finally, we restore normal water flow and fire the unit up to test the gas pressure and burner performance. We verify that the water is reaching the exact temperature set on your controller and that the unit is operating quietly. We proudly provide this thorough level of tankless water heater maintenance to properties throughout Deer Valley and the surrounding communities.

Related Plumbing Services to Protect Your Home

Upgrades and Immediate Repairs

If your tankless unit is struggling heavily with mineral buildup, we highly recommend looking into Water Softener Installation & Replacement. Installing a water softener removes the calcium and magnesium before it ever reaches your water heater, drastically extending the life of your tankless unit and your home's entire plumbing system.

If during our tune-up we discover that a component has already failed, our technicians are fully equipped to handle the problem immediately. We can transition seamlessly into Tankless Water Heater Repair & Service to replace faulty flow sensors, gas valves, or control boards. Our goal is always to get your hot water flowing reliably again the very same day.

The Cost of Skipping Tankless Water Heater Maintenance

Efficiency Loss and Higher Utility Bills

Tankless water heaters are premium appliances, and neglecting their maintenance carries heavy financial consequences. The most immediate impact is on your utility bills, as a scaled-up unit burns significantly more gas to heat water through layers of mineral deposits. You are essentially paying extra money every month just to force your unit to work harder than it should.

This extra strain also forces the internal fan and gas valve to operate at maximum capacity just to meet basic hot water demands. Over time, this constant overexertion causes these expensive components to wear out prematurely. Routine maintenance keeps the system running smoothly so it uses the least amount of energy possible.

Voided Warranties and Premature Replacement

Nearly every manufacturer requires proof of annual or bi-annual maintenance to keep the warranty valid. This is especially strictly enforced in hard water areas where scale buildup is a known hazard. If the heat exchanger cracks due to scale buildup and you have not maintained it, the manufacturer will void the warranty entirely.

Replacing a ruined heat exchanger often costs nearly as much as buying an entirely new water heater. Routine maintenance is a fraction of the cost of premature replacement and keeps your warranty intact. Protecting your investment now prevents massive emergency replacement bills down the road.

Schedule Your Deer Valley Tankless Water Heater Service

Do not wait for your hot water to cut out completely or for a minor flow issue to turn into a major internal leak. Routine flushing and calibration will keep your system running efficiently, quietly, and reliably for years to come. When you need expert tankless water heater maintenance in Deer Valley, the professionals at Gold Star Plumbing & Drain are ready to help you protect your investment.

Tell us what it is doing.

Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. If water is moving right now, call instead. A person answers.

Hours
Open 24 hours, seven days
Licence
Arizona ROC 327327

Book a time online

Pick a slot and it is a confirmed appointment, not a request.

Rather talk it through? Call (480) 571-5944 — a person answers, every hour of every day.

Or tell us what is going on

Send it through and a member of the Gold Star team will call you back to answer your questions and schedule the work.

Request Your Service

Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. Need help now? Call: emergency plumbers are dispatched 24/7.

Loading form. If it does not load, please use the other contact options on this page.

How we use your information: Privacy Policy · Your Privacy Choices

Call now Book online