Skip to content
East Valley (480) 571-5944 · Northern AZ (928) 813-0825 · Open 24 hours, seven days. $300 off tankless water heater installation → · Finance now →

Tankless Water Heater

Tankless Water Heater Maintenance & Tune-Up in Glendale, AZ

Resolving Hot Water Interruptions with Tankless Water Heater Maintenance in Glendale

Are you suddenly dealing with lukewarm showers, noticeable drops in hot water pressure, or a tankless unit that constantly flashes error codes on the control panel? When a tankless system acts up, it usually means the narrow heat exchangers are choked with hard water scale or the air intakes are clogged with dust. You don't have to live with unreliable hot water, because Gold Star Plumbing & Drain provides the specialized flushing and tune-up services required to clear out mineral buildup, restore your water pressure, and get your system running efficiently again.

Signs Your Tankless Water Heater Needs a Professional Tune-Up

Inconsistent Water Temperatures

You step into the shower, the water is hot for a minute, turns freezing cold, and then slowly gets hot again. Plumbers refer to this frustrating experience as the cold water sandwich. This happens when the unit's flow sensor or flame rod is dirty, causing a delay in the ignition sequence when you turn on a tap.

The system struggles to read the water demand accurately and fails to heat the water continuously as it flows through the pipes. If left unaddressed, the sensors will eventually fail completely. This leaves you with no hot water at all and requires immediate part replacements to restore service.

Noticeable Drop in Hot Water Pressure

Your cold water pressure is perfectly fine, but the moment you switch to hot water, the flow slows down to a weak trickle. This is a classic sign of severe scale buildup inside the unit. The narrow pipes of the heat exchanger are becoming heavily restricted by calcium and magnesium deposits.

These mineral deposits physically block the water from flowing through the system at full volume. Forcing water through a restricted, calcified heat exchanger causes the system to overheat rapidly. This overheating is the leading cause of premature system failure for homeowners in our area.

Flashing Error Codes on the Control Panel

The digital display on your unit or remote temperature controller begins flashing a specific sequence of numbers. In some models, a dedicated maintenance light simply stays illuminated on the front panel. Modern tankless water heaters have built-in diagnostics to alert you when something is wrong inside the cabinet.

These codes are the system's way of telling you it has detected a problem that requires professional attention. Often, this indicates a blocked exhaust, a clogged inline water filter, or an ignition failure. Resetting the unit to clear the code without addressing the root cause will eventually trigger a hard lockout for safety reasons.

Unusual Rumbling or Whining Noises

When the hot water is running, you hear a low rumbling, popping, or high-pitched whining sound coming directly from the tankless unit. Tankless water heaters should operate relatively quietly, so any loud noises are a major red flag indicating internal stress. The rumbling is caused by water boiling against a thick layer of mineral scale inside the heat exchanger.

A high-pitched whining sound usually indicates restricted water or gas flow through the internal valves. These noises mean the unit is operating under extreme stress to meet your household demands. The longer it runs in this condition, the higher the risk of the heat exchanger cracking and leaking water inside the cabinet.

What Causes Tankless Water Heater Performance Issues?

Severe Mineral and Scale Buildup

Over time, dissolved minerals in the water supply precipitate out when heated inside the appliance. This forms a hard, crusty layer of scale inside the unit's internal piping and delicate flow valves. Because Glendale has notoriously hard municipal water, this calcification happens at an accelerated rate compared to other regions.

A unit that might need flushing every two years in another state often requires annual or even bi-annual descaling here. The solution involves isolating the unit from the home's plumbing using dedicated service valves. We then pump a specialized descaling solution through the heat exchanger for nearly an hour to dissolve the stubborn buildup.

Clogged Air Intakes and Exhaust Vents

Your unit must draw in enough fresh air to maintain a proper flame and safely vent the combustion gases outward. Many homes have tankless units installed in garages or on exterior walls where they are exposed to the elements. Between dry desert winds kicking up dust and ambient debris, the intake screens on gas tankless heaters get choked very quickly.

When the unit cannot breathe, the burner cannot fire efficiently and the system will shut down. A professional tune-up includes removing the housing and vacuuming out the burner chamber to remove accumulated debris. We also thoroughly clean the air intake filter and exhaust venting to restore proper airflow and safe combustion.

Fouled Ignition Systems and Flame Rods

Sometimes the spark igniter fails to light the gas burner, or the flame rod fails to detect that a flame is present. When this happens, the gas valve shuts off immediately as a built-in safety precaution to prevent gas leaks. Airborne dust, humidity variations, and normal combustion byproducts create a thin layer of carbon buildup on these sensitive metal probes.

A technician will carefully remove the burner assembly components to address this ignition issue. We gently clean the flame sensor and igniter with an abrasive pad to restore clean metal-to-metal contact. This vital step allows the system to fire up instantly the moment you turn on a hot water tap in the house.

Debris in the Inline Water Filter

The small, mesh screen located at the cold water inlet of the tankless heater can easily become clogged with sediment. This screen is designed to protect the internal components, but a severe clog will restrict water flow into the unit. Municipal water lines often carry small amounts of sand, rust, and sediment that travel through your pipes.

When local water mains are flushed or disturbed, this debris gets pushed directly into your home's plumbing and caught in the unit's filter. The technician will shut off the water supply and carefully remove the inline screen for inspection. We then clean out the trapped sediment and inspect the O-rings before reassembling the water connection.

What to Expect During Your Tankless Water Heater Tune-Up

Comprehensive System Diagnostics

When you call for maintenance, the goal is to completely reset the system's efficiency and catch minor wear and tear before it causes a breakdown. When Gold Star Plumbing & Drain arrives at your home, the service begins with a comprehensive diagnostic test of the equipment. We check for any hidden error codes and verify the unit's current temperature output and incoming gas pressure.

This initial inspection tells us exactly how the unit has been performing and highlights any immediate areas of concern. We also inspect the exterior cabinet and surrounding plumbing connections for any signs of slow leaks or corrosion. Understanding the baseline performance ensures we apply the right maintenance techniques for your specific model.

The Professional Descaling Process

The core of the tune-up is the intensive descaling process, which requires specialized equipment to perform correctly. The technician will attach a submersible pump and heavy-duty hoses to the unit's hot and cold isolation valves. We then circulate a safe, industrial-grade descaling solution through the heat exchanger for nearly an hour.

This continuous circulation breaks down the hardened calcium and magnesium deposits trapped inside the narrow copper or stainless steel piping. Flushing the system restores the original internal diameter of the pipes, allowing water to flow freely again. It also removes the insulating layer of scale, allowing the burner to heat the water much more efficiently.

Final Cleaning and Test Firing

While the unit is flushing, the technician will clean the inline water filter and clear the air intake screen of any dust. We also inspect the venting for blockages and carefully clean the flame sensor and ignition rods inside the burner chamber. Addressing these smaller components is what prevents nuisance error codes and sudden shutdowns during the year.

Finally, the system is reconnected to your home's water supply and purged of any trapped air. The technician will test-fire the unit multiple times to ensure it is delivering strong water pressure and consistent, rapid heat. We make sure the water temperature matches your settings exactly before finishing the service visit.

Comprehensive Plumbing Solutions for Your Home

Because hard water is the primary cause of tankless heater failure in our area, many homeowners pair their tune-up with Water Softener Installation & Replacement. Removing the calcium before it reaches your heater dramatically extends the life of the unit and stretches out the time needed between flushes. If your unit has already stopped producing hot water or is leaking from the bottom, our team also provides full Tankless Water Heater Repair & Service to diagnose and replace broken sensors, valves, or heat exchangers.

The True Cost of Skipping Tankless Water Heater Maintenance

Voided Manufacturer Warranties

Tankless water heaters are high-performance machines, and skipping annual maintenance carries steep consequences for your warranty coverage. Almost all major manufacturers will void the warranty on the heat exchanger if you cannot prove the unit has been regularly flushed by a professional. Manufacturers know that scale buildup destroys these units, and they require proof of maintenance to honor replacement claims.

If a critical part fails and you have no service records, you will be paying completely out of pocket for the replacement parts and labor. A professional tune-up provides the documentation you need to keep your warranty active and valid. Protecting your warranty is one of the smartest financial reasons to schedule routine service.

Wasted Energy and Higher Utility Bills

Scale buildup acts as a powerful insulator inside the internal piping of your water heater. When the heat exchanger is coated in minerals, the burner has to run longer and hotter to heat the water to your desired temperature. This excessive run time drives up your utility bills and completely negates the energy-saving benefits of owning a tankless system.

The harder the unit works to heat the water, the more gas or electricity it consumes during every single shower. A freshly descaled unit transfers heat instantly, keeping your energy costs as low as possible. Regular maintenance pays for itself by maintaining the maximum efficiency rating of your equipment.

Catastrophic Heat Exchanger Failure

Ultimately, ignoring maintenance leads to the heat exchanger warping or cracking under the intense thermal stress. When scale blocks the water flow, the heat cannot dissipate, causing the metal components to overheat and fracture. Replacing a cracked heat exchanger often costs nearly as much as buying a brand-new water heater.

Once a heat exchanger cracks, water will leak inside the cabinet and often destroy the electronic control boards as well. Routine maintenance prevents this catastrophic failure by keeping the internal passageways clear and the operating temperatures normal. Taking care of your unit now ensures it will keep running efficiently for over a decade.

Schedule Your Professional Tune-Up Today

Don't wait for your hot water to cut out mid-shower or for a costly error code to lock up your system. Routine maintenance is the single best investment you can make to protect your tankless unit and ensure it delivers reliable hot water year-round. Gold Star Plumbing & Drain is ready to help Glendale homeowners keep their systems running at peak performance, so contact us today to schedule your comprehensive flush and tune-up.

Tell us what it is doing.

Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. If water is moving right now, call instead. A person answers.

Hours
Open 24 hours, seven days
Licence
Arizona ROC 327327

Book a time online

Pick a slot and it is a confirmed appointment, not a request.

Rather talk it through? Call (480) 571-5944 — a person answers, every hour of every day.

Or tell us what is going on

Send it through and a member of the Gold Star team will call you back to answer your questions and schedule the work.

Request Your Service

Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. Need help now? Call: emergency plumbers are dispatched 24/7.

Loading form. If it does not load, please use the other contact options on this page.

How we use your information: Privacy Policy · Your Privacy Choices

Call now Book online