Skip to content
East Valley (480) 571-5944 · Northern AZ (928) 813-0825 · Open 24 hours, seven days. $300 off tankless water heater installation → · Finance now →

Tankless Water Heater

Tankless Water Heater Maintenance & Tune-Up in Tempe, AZ

Resolving Tankless Water Heater Performance Issues in Tempe Homes

Are you noticing a sudden drop in hot water pressure, getting blasted with cold water in the middle of a shower, or seeing a persistent error code flashing on your tankless unit's display? These symptoms almost always point to severe mineral scaling inside the heat exchanger, which happens rapidly when Tempe's notoriously hard water flash-heats and leaves heavy calcium deposits behind. When your on-demand system stops keeping up with your household, Gold Star Plumbing & Drain is ready to clear the buildup and get your hot water running reliably again.

Warning Signs Your Tankless Water Heater Needs a Tune-Up

Fluctuating Water Temperatures (The "Cold Water Sandwich")

You might notice that the water starts hot, turns freezing cold for several seconds, and then gets hot again. This frequently happens when you turn the water off and back on quickly while doing dishes or showering. When hard water flows through the system, the flow sensor is one of the first components to suffer from mineral buildup.

As this small turbine gets coated in calcium, it spins slower, sending inaccurate readings to the computer board. The unit is simply failing to register the demand for hot water fast enough to ignite the burners in time. Ignoring these temperature fluctuations leads to an overworked burner and eventual system lock-out, leaving you with no hot water at all.

Noticeable Drop in Hot Water Pressure

The cold water pressure in your home remains strong, but the hot water flow slows to a trickle at the showerhead or kitchen sink. This indicates a severe restriction inside the tankless unit itself, preventing water from passing through smoothly. The internal inline water filter is likely clogged with sediment, or the narrow pathways of the heat exchanger are choked with calcium deposits.

Many mid-century homes in areas like South Tempe have been retrofitted with tankless units, sometimes utilizing existing older plumbing lines. These older pipes often shed rust and scale directly into the tankless unit's inlet filter. Forcing water through a restricted heat exchanger creates excessive backpressure inside the system, which can damage internal valves.

Flashing System Error Codes

The digital display on the unit or the remote temperature controller starts flashing a specific code and the unit refuses to fire. Modern tankless water heaters have built-in diagnostics to protect the system from permanent damage. An error code is the system's way of shutting down when it detects restricted water flow, blocked venting, or excessive scale buildup.

Common codes often point directly to an issue called 'descaling required' or indicate an exhaust blockage. Because these machines operate at such high temperatures, the computer will lock out the ignition sequence to prevent a fire hazard or internal meltdown. Resetting the unit without addressing the root cause will eventually fry the computer board or crack the heat exchanger.

Strange Rumbling or Whining Noises During Operation

When a hot water tap is opened, the unit makes a loud groaning, whining, or rumbling sound instead of its usual quiet hum. This noise is often caused by localized boiling inside the machine due to heavy scale accumulation. When scale creates a thick barrier inside the copper piping, the heat from the burner cannot transfer to the water efficiently.

Instead, the heat gets trapped against the metal, causing the water trapped under the scale to boil violently and create steam bubbles. A whining sound can also indicate a struggling fan motor that has become clogged with fine desert dust. Both of these issues are severe warning signs that require immediate professional attention to prevent catastrophic internal leaks.

What Is Causing Your Tankless Water Heater Problems

Severe Mineral and Scale Buildup

Tankless water heaters are incredibly efficient because they heat water instantly as it passes through a narrow maze of pipes called the heat exchanger. However, this flash-heating process causes dissolved solids in the water to instantly precipitate out and cling to the metal walls. Because Tempe relies heavily on hard groundwater, calcium and magnesium levels are exceptionally high in our municipal supply.

Tankless units here can scale up twice as fast as those in areas with softer water. The solution involves isolating the unit from your home's plumbing system using the dedicated service valves. We pump a specialized, professional-grade descaling solution through the heat exchanger for nearly an hour to dissolve the rock-hard buildup.

Clogged Inlet Water Filters

The small mesh screen located where the cold water enters the tankless unit becomes completely blocked by dirt, sand, and pipe scale. The inlet filter is your system's first line of defense against debris entering the delicate heat exchanger. When this screen is clogged, the flow rate drops so low that the unit safely assumes you have turned off the faucet.

Consequently, the system shuts down the burners entirely to prevent dry-firing the heat exchanger. In older neighborhoods with aging municipal lines or homes with galvanized piping, sediment frequently breaks loose and travels directly into the unit. A technician will shut off the water supply, remove and clean the inline filter, and flush the intake lines to restore full water pressure.

Ignition Failure from Debris and Dust

The spark igniter or flame rod becomes coated in carbon, dust, or debris, preventing the unit from sensing that a flame has been established. Our dry, dusty desert environment means air intakes pull in a significant amount of particulate matter over time. Eventually, this dust settles heavily on the sensitive ignition components inside the sealed combustion chamber.

A dirty flame sensor is a common nuisance issue that completely disables the system. The sensor uses a microamp electrical current to detect the presence of a flame, and even a thin layer of dust acts as an insulator. During a tune-up, the technician carefully cleans the flame sensor, inspects the spark igniter, and vacuums out the burner chamber to ensure clean combustion.

What to Expect During Your Tankless Water Heater Tune-Up

When you schedule a tankless tune-up, the first step is a comprehensive diagnostic check of the entire system. The technician will test the flow rate, check the temperature output, and review the unit's error code history to understand exactly how the system has been performing. This helps us identify any hidden issues before we begin the cleaning process.

Next, they will utilize the system's isolation valves to disconnect the unit from your home's water supply. Using a submersible pump and a specialized descaling chemical, they will flush the heat exchanger for up to an hour to break down the hardened calcium inside. This process safely strips away the mineral barrier without damaging the internal metal components.

Comprehensive Cleaning and Calibration

While the flush is running, the technician will clean the inlet screen, inspect the air intake and exhaust vents for blockages, and clean the flame sensor. We also take the time to inspect the gas lines and water connections, which is especially important for retrofitted systems that might be dealing with undersized supply lines. Ensuring the unit has adequate gas pressure and water volume is critical for preventing future lockouts.

Gold Star Plumbing & Drain provides this thorough maintenance service to homeowners throughout Tempe and surrounding communities. We ensure every component is calibrated for maximum efficiency before the unit is put back online. By the time we leave, your system will be running exactly as the manufacturer intended.

Related Services You May Need

If during the inspection we discover that scale has already caused permanent damage to a component, we can seamlessly transition to providing Tankless Water Heater Repair & Service to replace the affected parts. Additionally, to protect your investment and drastically reduce the need for frequent descaling, many homeowners opt for Water Softener Installation & Replacement. Removing the hard minerals before they reach the water heater is the most effective way to extend the lifespan of your tankless system.

The Cost of Ignoring Tankless Water Heater Maintenance

Tankless water heaters are high-performance machines that require regular maintenance to function properly. Skipping your annual tune-up directly impacts your wallet as the system struggles to operate efficiently. As scale builds up, the unit has to burn more gas to heat water through the mineral barrier, causing your utility bills to spike unnecessarily.

More importantly, ignoring maintenance is the leading cause of premature heat exchanger failure. If the heat exchanger cracks due to excessive scale and overheating, the repair is incredibly expensive and often requires replacing the whole unit. A cracked heat exchanger will also cause internal leaks that can short out the computer board and electrical components.

Protecting Your Equipment Warranty

Furthermore, almost all major manufacturers require proof of annual professional maintenance to keep the equipment's warranty valid. Neglecting this service can leave you paying completely out of pocket for a replacement if a major component fails. A simple tune-up is a small investment that protects a very expensive piece of home equipment.

Keeping up with maintenance also ensures your system operates safely without the risk of carbon monoxide issues from blocked venting. Regular descaling prevents the localized boiling that stresses the metal fatigue limits of your system. Ultimately, proactive care guarantees you always have access to endless hot water when you need it.

Schedule Your Maintenance Visit Today

Don't wait for your on-demand system to leave you with a cold shower when you need it most. Routine maintenance is the key to keeping your unit efficient, safe, and reliable for years to come. If you're experiencing temperature drops, low pressure, or it's simply been over a year since your last flush, Gold Star Plumbing & Drain is ready to help restore your hot water system. Reach out today to schedule your comprehensive tune-up and descaling service.

Tell us what it is doing.

Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. If water is moving right now, call instead. A person answers.

Hours
Open 24 hours, seven days
Licence
Arizona ROC 327327

Book a time online

Pick a slot and it is a confirmed appointment, not a request.

Rather talk it through? Call (480) 571-5944 — a person answers, every hour of every day.

Or tell us what is going on

Send it through and a member of the Gold Star team will call you back to answer your questions and schedule the work.

Request Your Service

Submit your request and a member of the Gold Star team will call you as soon as possible to answer your questions and schedule your service. Need help now? Call: emergency plumbers are dispatched 24/7.

Loading form. If it does not load, please use the other contact options on this page.

How we use your information: Privacy Policy · Your Privacy Choices

Call now Book online