Step 02 · Evaluate · 5 min read
By Mike Smith
, Owner, Gold Star Plumbing & Drain ·
LinkedIn
Every drain company owns a cable machine, a jetter and a camera. The difference between a fix and a comeback visit is knowing which one a particular clog actually needs — because they do very different jobs.
Here is what each method really does inside the pipe, where each one falls short, and the honest logic for choosing between them.
What does a drain snake actually do?
A cable machine drills a hole through the blockage and restores flow — fast, effective, and by design it clears the clog rather than cleans the pipe.
Snaking runs a rotating steel cable with a cutting head down the line until it chews through whatever is blocking it. For the everyday clog — hair and soap in a bathroom line, a kitchen branch line slowed by buildup, an object flushed by a toddler — it is exactly the right tool, which is why it is the standard first move on a single slow fixture.
Its limit is in the physics: a cable opens a channel through the middle of the blockage. Grease, sludge and scale coating the pipe walls stay put, and roots that are cut off at the pipe grow back from the cut. When the same drain clogs every few months, the snake is not failing — it is telling you the problem is on the walls, not in the channel.
When is hydro jetting worth it?
When the pipe is coated rather than just plugged: jetting scours the pipe walls back to bare pipe with high-pressure water, which a cable cannot do.
Hydro jetting feeds a hose down the line with a nozzle that blasts water backward and sideways under high pressure, stripping grease, sludge, scale and root mass off the walls and washing it all downstream. It is the difference between poking a hole through a problem and removing it. For recurring clogs, greasy kitchen mains and root-prone older lines, jetting is usually the answer the repeat snake visits were pointing at.
The honest caveats: it is more involved than snaking, and pressure that strips scale can also find weaknesses in a pipe that is already failing. That is not a reason to fear jetting — it is the reason a line's condition should be known before the nozzle goes in, which brings us to the camera.
Why run a camera at all?
Because the camera replaces guessing: it shows what the blockage is, where it is, and whether the pipe itself is intact — which decides everything downstream.
A sewer camera travels the line and shows the actual situation: grease or roots, a flat spot holding water, a joint that has offset, or a section of old pipe that has collapsed. On a main line problem, that picture is what separates "clear it and camera it to confirm" from "this line needs repair, and cleaning it again would just rent you a few more weeks."
Camera-first versus clear-first is situational. A fully blocked line often has to be opened with a cable before a camera can even see. But on recurring problems, slow mains and anything involving older clay or cast iron — common in the Valley's older neighborhoods — the camera is what keeps you from paying to treat the wrong problem twice.
So which one does your clog need?
One slow fixture: snake it. A recurring or whole-house problem: clear it, camera it, and let the picture choose between jetting and repair.
A single slow drain with the rest of the house flowing is a branch line issue and a straightforward drain cleaning call. Every drain slowing at once means the main line, and a main deserves the full logic: restore flow, then look, then fix the cause — whether that is jetting the buildup or repairing a broken section.
One thing we will keep saying: skip the chemical drain openers while you wait. They rarely clear a real blockage, they corrode older Arizona pipe, and they sit in the line waiting for whoever opens it next.
Quick answers
- Is hydro jetting safe for old pipes?
- On a structurally sound line, yes — pressure is adjusted to the pipe. On a line that is already cracked or collapsing, no method is safe from the truth, which is why a camera look comes first on questionable lines.
- Why did my drain clog again a month after snaking?
- Because the cable opened a channel through buildup that is still coating the pipe, or roots have regrown. A repeat clog on the same line is the classic sign it is time for a camera and probably a jetting.
- Do you camera every drain call?
- No. A simple branch-line clog does not need one. Cameras earn their place on main lines, recurring problems and older pipe, where seeing the line changes the plan.
Next step
Drain cleaning