Step 02 · Evaluate · 4 min read
By Mike Smith
, Owner, Gold Star Plumbing & Drain ·
LinkedIn
Pipe material sounds like a detail until you are comparing repipe quotes, or a plumber points at the gray pipe in your garage and frowns. Each material has a job it does well and places it should never be used.
Here is a plain guide to the pipes you will find in an Arizona home: which ones carry clean water in, which carry waste out, and how a plumber chooses between them.
Which pipe does which job in a house?
Supply lines carry pressurized water into the house and are usually copper or PEX. Drain lines carry waste out by gravity and are usually ABS or PVC plastic.
The two systems never mix. Supply pipe is built to hold steady pressure and is approved for drinking water. Drain pipe is larger, carries no pressure, and relies on slope to move waste toward the sewer.
Older homes can hold other materials. Galvanized steel supply pipe rusts from the inside, and gray polybutylene pipe, used in many homes built from the late 1970s to the mid-1990s, has a reputation for failing at its fittings. If your house has either, our guide to the signs you need repiping is worth a read.
What are copper's strengths and weak spots?
Copper is durable, handles heat well and has a long track record, but it costs more to install and can develop pinhole leaks under some conditions.
Copper is rigid and joined with soldered or pressed fittings, which takes skill and time. It does not break down in sunlight, it tolerates high temperatures, and a well-installed copper system can serve a house for a very long time.
Its weak spot is pinhole leaks, which can come from several causes, including water chemistry and high water velocity. Many Valley homes also have copper running under the concrete slab, which is where slab leaks start. Our guide to slab leaks explains what that looks like and what happens next.
Why do so many repipes use PEX-A?
PEX-A is flexible, needs fewer fittings, and can usually be routed through attics and walls with less drywall opened up.
PEX is a flexible plastic pipe rated for hot and cold drinking water. PEX-A is made with a process that keeps it especially flexible, and it is joined with expansion fittings: the pipe is stretched over the fitting and shrinks back to grip it tightly. Fewer joints means fewer places for a leak to start.
PEX has limits too. It must not be left in direct sunlight, so it is not used for exposed outdoor runs. It needs to be supported correctly and kept away from very hot surfaces like flue pipes. Installed to code, it handles Arizona attics and walls well.
Where do PVC and ABS fit?
They are drain, waste and vent pipes. Neither is used to carry pressurized drinking water into the house.
ABS is the black plastic drain pipe found in many Arizona homes, and PVC is the white plastic pipe used for drains and irrigation. Both are joined with solvent cement. Local plumbing code decides which drain materials are approved where you live. Gold Star uses ABS and other code-approved materials for drain and sewer piping.
Older homes may still have cast iron drains or clay sewer laterals running out to the street. When those crack or let roots in, the choice between lining the pipe and digging it up is covered in our guide to trenchless vs. dig and replace.
What does Gold Star use, and how do you choose?
Copper and PEX-A for water lines and repiping, and ABS and other code-approved materials for drains and sewer lines.
The right choice depends on where the pipe has to run, what is already in the house, how much wall you want opened, your water quality and your budget. Your plumber walks through those factors and presents options for your home, whether that is a whole-house repipe, a water line replacement or a drain repair.
Each option comes with its own warranty coverage. Gold Star offers "Industry-Leading Warranty Options—from a Two-Year Minimum up to Lifetime Parts and Labor." Terms vary by service, material and option, and are explained before work begins.
Quick answers
- Is PEX safe for drinking water?
- Yes. PEX sold for supply lines is tested and certified for drinking water and approved by plumbing codes for that use.
- Can copper and PEX be connected?
- Yes, with the proper transition fittings. Mixing them is common when only part of a system is being replaced.
- If one section leaks, do I need to replace all my pipes?
- Not always. A single leak is often a repair. A pattern of leaks, rust-colored water or a known problem material like polybutylene is when a repipe enters the conversation.
Next step
Piping services