Symptom Center · 4 min read
By Mike Smith
, Owner, Gold Star Plumbing & Drain ·
LinkedIn
White crust around the faucet, cloudy spots on clean glasses, soap that will not lather and skin that feels tight after a shower are all signs of hard water. In much of Arizona they are so common that many people assume they are just normal.
Our hard water guide explains where Arizona hardness comes from and what scale does inside your plumbing. This page is about the symptom in front of you: how to confirm it, why a softener you already own might not be doing its job, and what the treatment options are.
What are the signs of hard water?
White or chalky crust on fixtures, spots on dishes, soap that does not lather well, dry skin and hair, and a water heater that rumbles or runs out sooner.
Hard water carries dissolved calcium and magnesium. When it dries or heats, those minerals come out as scale. You see it on faucets, shower doors and glassware, and you feel it in soap that will not lather and skin that feels dry.
The signs you cannot see matter more. Scale builds inside faucet cartridges, toilet fill valves and the water heater, which is why fixtures drip and heaters lose capacity sooner in hard-water areas.
- White crust on faucets, shower heads and tub spouts
- Spots and film on dishes and glasses
- Soap and shampoo that do not lather well
- Dry, itchy skin and dull hair
- A water heater that rumbles or runs out of hot water sooner
My home has a softener. Why am I still seeing scale?
The softener may be out of salt, set wrong for your water, or no longer regenerating.
A softener removes hardness by trading the minerals for sodium or potassium, and it has to recharge itself, called regenerating, on a schedule. If the brine tank is empty, or the salt has formed a hard crust called a bridge that the water cannot reach, the softener stops working without any warning light.
Other common causes are a control valve set for the wrong hardness, a timer that lost its settings after a power outage, or resin inside the tank that has worn out with age. A system too small for the household can also run out of capacity between cycles.
You can check two things yourself: look in the brine tank for salt and gently break up any crust with a broom handle, and check that the display shows the correct time of day. If those look right and the scale is still there, the system needs a look.
What does a water test show?
We test your water, look at what the scale has already done to the heater and fixtures, and size a softener or filtration system to the household rather than the catalogue.
Free In-Home Water Testing—Always. A plumber tests your water at the house and walks you through the results, including hardness and other qualities that matter when choosing a system. We also look at the water heater, the fixtures and any softener you have to see what the water has already done.
You can book a test through our free water testing page. It is a good first step even if you are not sure you want a system, because it replaces guessing with numbers.
What are the treatment options?
A water softener for scale, whole-home filtration for taste and other contaminants, and reverse osmosis for drinking water. Many homes combine them.
A water softener stops new scale where water enters the house. Whole-home filtration handles chlorine taste and odor and other things a softener does not remove. A reverse osmosis system at the kitchen sink adds another step for drinking and cooking water. Gold Star water treatment systems are custom-built for Gold Star by Wood Brothers Industries.
If you already have a softener that has stopped working, softener repair may be all you need. For ongoing upkeep, salt and potassium delivery plans include a system inspection and tune-up with each delivery. Financing Options Available through GreenSky for new systems.
Quick answers
- Is hard water safe to drink?
- Yes. Calcium and magnesium are not a health problem. Hard water is a plumbing and appliance problem. If you do not like the taste, that is a filtration question rather than a softening question.
- Should I use salt or potassium in my softener?
- Both work. Potassium is an option for households that want to avoid adding sodium to their water, and it generally costs more. The plumber can tell you whether your system is set up for either.
- Will a softener remove the scale that is already there?
- Softened water can slowly loosen some existing scale, but heavy buildup in fixtures and the water heater usually needs cleaning, flushing or replacing the affected part.
Next step
Free water testing