Skip to content
East Valley (480) 571-5944 · Northern AZ (928) 813-0825 · Open 24 hours, seven days. $300 off tankless water heater installation → · Finance now →

Symptom Center

Warm Spot on the Floor or a Meter That Keeps Turning?

A slab leak can run for months, quietly wasting water and soaking the soil under the house.

Same day A slab leak can run for months, quietly wasting water and undermining the foundation.

Book Online

Symptom Center · 4 min read

By Mike Smith , Owner, Gold Star Plumbing & Drain · LinkedIn

Some leaks never show a drop of water. They run under the concrete slab or inside a wall, and the first clues are indirect: a warm patch of floor, a water bill that keeps climbing, or a meter that keeps turning when nothing in the house is on.

If you have not run the water meter test yet, our guide to spotting a hidden leak with the meter test walks through it step by step. This page picks up from there: what the result means, what to do today, and how the leak gets found and fixed.

What causes a hidden leak?

Most often a pinhole in a hot line under the slab, a failing supply line inside a wall, or an irrigation or pool line leaking underground.

Many Arizona homes run copper water lines under the concrete slab. Over the years, hard water moving through the pipe and soil pressing on the outside can wear a pinhole into the copper. On a hot line, that leak warms the floor above it, which is why a warm spot underfoot is such a common first clue.

Leaks also hide inside walls, where a supply line or fitting can drip for months before a stain shows. Outside, an irrigation line or a pool fill line can leak underground and show up only on the bill. Our guide to slab leaks covers why they are so common in the Valley.

  • A warm or damp spot on a tile or concrete floor
  • A water bill that climbs without a reason
  • The sound of running water when everything is off
  • A water meter that turns with every fixture off
  • New cracks in flooring, a musty smell, or a stain that keeps coming back

What should I do today?

Photograph your meter reading, then take another two hours later with no water used. That number is useful to us.

Photograph the meter, including the small low-flow indicator. Then use no water at all for two hours, including toilets, the ice maker, the softener and irrigation, and photograph it again. The difference shows how much water is being lost, which helps the plumber judge how big the leak is.

Before you call, rule out the easy suspects: a running toilet, a water softener stuck in a cycle, or a pool autofill valve can all turn the meter. If one of those is the cause, it is a simpler repair.

If the meter is moving quickly or you see water surfacing through the floor or in the yard, close the main shutoff and call. That is an active leak. For a slow leak with no visible water, normal life can continue while you book the visit, but book it today rather than next month.

What does the plumber check first?

We isolate the system to prove the leak is yours, then pinpoint it so the repair opens one small area rather than a room.

First we confirm the loss is real and on your side of the meter. Then we isolate parts of the system, such as hot from cold and house from yard, to narrow down which line is leaking. Once we know the line, we locate the leak along it.

Pinpointing matters because the repair goes where the leak is. The more precisely the leak is located, the smaller the opening in your floor, wall or yard. Our leak detection page covers the process. Same-Day Service Available.

What are the fix options for a slab leak?

Repair the leak in place, reroute the line around the slab, or repipe when the lines are failing in more than one place.

A spot repair opens the floor at the leak, repairs the pipe and closes it back up. It makes sense for a single leak in a line that is otherwise in good shape. A reroute abandons the leaking run under the slab and runs a new line through the walls or attic instead, which avoids opening the floor and takes that run out from under the concrete. Our slab leak repair page explains both.

When a home has had more than one slab leak, the lines may be wearing out together, and a whole-home repipe can be the lasting fix. Our guide to signs you need repiping covers how to tell. Three Clear Options. No Pressure. You see each option with upfront pricing and approve one before work begins.

Quick answers

Is a slab leak an emergency?
It is urgent, but usually not a middle-of-the-night emergency. Same-day attention is the right speed. If water is surfacing or the meter is spinning fast, close the main shutoff and call right away.
Will my homeowner's insurance cover a slab leak?
That depends on your policy. Many policies treat finding the leak, repairing the pipe and repairing water damage differently. Call your insurance carrier and ask, ideally before the repair starts.
Can a slab leak damage my foundation?
A leak left running for a long time can soften or wash out the soil under the slab. That is one reason not to let a known leak wait.

Next step

Meter moving with everything off? Book leak detection. We find the leak first so the repair is as small as it can be.

Leak detection
Call now Book online